Главная
» Электронная библиотека » The Influence of the Design Parameters and Technological Factors on Functional Properties of the Spiral Joints of the Parts
The Influence of the Design Parameters and Technological Factors on Functional Properties of the Spiral Joints of the Parts
| Категория: | техника | |
| Авторы (ПГУ): | Воячек Игорь Иванович [50]  , Кочетков Денис Викторович [48] , Баранов Илья Викторович [0] , Воячек Ольга Станиславовна [2] | |
| Аннотация: | Profiled joints of parts (PJ), in which the transfer of the operational load occurs by means of force closure of surfaces, are quite widely used in mechanical engineering. An alternative type of joint is a joint with a guaranteed tension (IFJ), which transmit the load by frictionally closing the mating surfaces of the parts. Such a joint combines the advantages of PJ and IFJ is a spiral friction-profile joint (SFPJ). It joins parts with spiral profile of mating surfaces. The properties of the spiral connection of parts are practically not studied, and there is no methodology for its design and the corresponding regulatory documentation. This article examines the influence of the design parameters and technological factors on the functional properties and stress–strain state of the SFPJ. Analytical methods are used, as well as the finite element method in computer modeling. The design parameters influencing the nominal area parts’ contact are found. The irregularity in the distribution of the equivalent tensions in the contact area is found. The technological factors which are necessary to control in order to provide SFPJ functional properties are found. The spiral friction-profile joint can effectively replace spline, keyed, pinned, profiled joints, tension joints and other fixed connections. | |
| Тип: | Статья | |
| Вид: | электронная копия бумажного издания | |
| Количество частей: | 1 | |
| Год издания: | 2022 | |
| Издательство: | Springer International Publishing, Switzerland | |
| Где опубликовано: | Зарубежный журнал | |
| Индексация: | Иные зарубежные (ERIH, PubMed, MathSciNet, zbMATH, Chemical Abstracts, Agris, Social Science Research Network, Springer, GeoRef, Astrophysics Data System) | |
| Целевая аудитория: | Исследователь | |
| Целевое назначение: | Научное | |
| Отрасль науки: | 05.02.08 Технология машиностроения | |
| Лицензия: | Нет ограничений | |
| Ограничения: | Нет ограничений | |
| Правообладатель: | Воячек И.И., Кочетков Д.В. | |
| DOI: | 10.1007/978-3-031-11058-0_75 | |
| Библиографическая ссылка: | Voyachek, I., Kochetkov, D., Baranov, I., Slashchev, E., Voyachek, O. (2023). The Influence of the Design Parameters and Technological Factors on Functional Properties of the Spiral Joints of the Parts. In: Guda, A. (eds) Networked Control Systems for Connected and Automated Vehicles. NN 2022. Lecture Notes in Networks and Systems, vol 509. Springer, Cham. https://doi.org/10.1007/978-3-031-11058-0_75 | |
| Страницы (с ... по ...): | с 751 по 760 | |
| Внешняя веб-ссылка: | https://link.springer.com/chapter/10.1007/978-3-031-11058-0_75 | |
| Язык: | Английский | |
| Место хранения: | Вне ПГУ | |
| Дата размещения: | 23.11.2022 | |
| Владелец: | Кочетков Денис Викторович | |
| Ссылка на ресурс: | http://elib.pnzgu.ru/library/1668547596  | |
| Формат: | Не указан |